Table of Contents
Advertisement
//This command is to set the OSPF redistribution RIP.
switch(config-ospf)#redistribute RIP
//This command is to set the OSPF redistribution static.
switch(config-ospf)#redistribute static
//This command is to set the OSPF redistribution connected.
switch(config-ospf)#redistribute connected
5.3.8
default-information originate
Command Description
default-information originate [always] [metric] [metric-type] [route-map]
no default-information originate [always] [metric] [metric-type] [route-map]
//default-information originate command is used to configure the local router to
generate a default OSPF routing and related parameters, and to notify the neighbors.
//no default-information originate command is used to cancel the generation of the
default route or to change the associated parameters.
Parameter
always
always
metric-type
route-map
Default
None
Command Mode
OSPF configuration mode
Example
//Configure OSPF process 11 to generate a default route for metric 12:
switch(config-ospf-11)#default-information originate metric 12
5.3.9
ip ospf
Command Description
Ip ospf cost/network/priority/hello-interval/dead-interval/authentication/
authentication-key
Always notify the default route.
Notice the cost of the default route.
Notice the type of default route, the value of 1
or 2, the default is 2.
Notice the default route to call the route-map
rule.
Hide quick links:
Advertisement
Table of Contents
