Table of Contents
Advertisement
Command Mode
Global configuration mode
Example
//This command is to reauth-period is 2400s.
switch(config)#Dot1x timer reauth-period 2400
switch(config)#Dot1x timer quient-period 20
6.5.6
dot1x auth-mode
Command Description
dot1x auth-mode authorized-force/ auto/ unauthorized-force
//Modify port Dot1x authentication after forced through / Auto / force no option.
Parameter
authorized-force
auto
unauthorized-force
Default
auto
Command Mode
Interface configuration mode
Example
//Configuration mandatory certification through of port1.
switch(config)#interface G1
switch(config-G1)# dot1x auth-mode authorized-force
6.5.7
dot1x controlled-mode
Command Description
dot1x controlled-mode based-on-mac/ based-on-port
//This command is used to configure based-on-mac/based-on-port 802.1x as the port
authentication mode.
Parameter
based-on-mac
based-on-port
Default
based-on-mac
Command Mode
Interface configuration mode
forced authenticating successfully
automatic
forced authenticating unsuccessfully
Authentication Based on MAC Address
Authentication Based on Port
Hide quick links:
Advertisement
Table of Contents
