Table of Contents
Advertisement
mac-address static
6.2.1
mac-address static
Command Description
mac-address static mac-addr vlan vlan-id interface interface-id
//This command is used to add a static MAC address.
no mac-address static mac-addr vlan vlan-id
// This command is used to delete a static MAC address.
Parameter
Parameter
mac-addr
vlan-id
interface-id
Default
None
Command Mode
Global configuration mode
Example
//Run the following command to bind the MAC address 00-00-00-00-00-01 to port
10 that belongs to VLAN2:
switch(config)# mac-address static 00-00-00-00-00-01 vlan 2 interface T10
6.3
ARP binding
ARP binding configuration commands include:
ip-mac bind
show ip-mac bind
Function Brief
In order to r manage the computer bette in the network, you can use
the ARP binding function to control the network access (IP binding).
Note:
Because it is a private function, showing in ARP table is still
dynamic item when static binding.
Parameters of the command mode
It specifies the MAC address.
It specifies the VLAN to which the
MAC address belongs. The value
ranges from 1 to 4094.
It specifies the physical port to which
the MAC address belongs.
Hide quick links:
Advertisement
Table of Contents
