Table of Contents
Advertisement
offset-list <acl-name> {in | out} <metric> [<if-name>]
No offset-list <acl-name> {in | out} <metric> [<if-name>]
Parameter
Default
None
Command Mode
Interface configuration mode
Example
//The rule that calls the ACL1, the offset is set to 16 at G2 port import direction .
switch(config)# router rip
switch(config-rip)# offset-list 1 in 16 G2
5.5.8 passive-interface
Command Description
passive-interface <if-name>
//This command is to configure RIP passive-interface
No passive-interface <if-name>
//This command is disable RIP passive-interface
Parameter
None
Default
None
Command Mode
Interface configuration mode
Example
//this command is to configure vlan3 for passive-interface.
switch(config)# router rip
switch(config-rip)#passive-interface vlan3
Parameter
Parameters of the command mode
acl-name
Call access control list name
In| out
Call ACL application direction
Metric
Set offset by default 1, range 1-16
If-name
Application
interface, the default all applications
of
the
rules
of
the
Hide quick links:
Advertisement
Table of Contents
