Table of Contents
Advertisement
Example
//This command will configure a old time of 200s:
switch(config)# igmp-snooping host-age-time 200
4.6.3
igmp-snooping fast-leave
Command Description
ip igmp-snooping fast-leave:
//This command is used to enable the immediate leave function of a port.
no ip igmp-snooping fast-leave:
//This command is used to disable the immediate leave function of a port.
Parameter
None
Default
Disable
Command Mode
Interface configuration mode
Example
switch(config)# interface G1
switch(config-G1)# igmp-snooping fast-leave
4.6.4
igmp-snooping static-group
Command Description
igmp-snooping static-group
//This command is to add the static multicast group.
no igmp-snooping static-group
//This command is to delete the static multicast group.
Parameter
None
Default
Disable
Command Mode
Interface configuration mode
Example
switch(config)# interface G1
switch(config-G1)# igmp-snooping static-group 224.1.1.1 vlan 2
switch(config-G1)# no igmp-snooping static-group 224.1.1.1 vlan 2
Hide quick links:
Advertisement
Table of Contents
