Example - Dahua DH-PFS6428-24T Cli Configuration Manual

None
Command Mode
Privileged mode

Example

//This command is to display all VLAN information.
Switch#show vlan
Vid Status Name
---------------------------------------------------------------
------------------------------------
1 static vlan1
2 static vlan2
3 static vlan3
4.1.5
example
Enable VLAN communication across different switches. (PC1 and PC2 can
communicate with each other normally.)
SW1/SW2:
switch# configure terminal
switch(config)# interface G1
switch(config-if)# switchport mode trunk
switch(config-if)# switchport trunk tag 2
switch(config-if)# exit
switch(config)# interface G2
switch(config-if)# switchport mode access
switch(config-if)# switchport access vlan 2
phenomenon:
pc1（192.168.222.107）and pc2（192.168.222.94）are mutually
pinged.
Ports
G1 G2 G3 G4 T1 T2 T3 T4 T5 T6 T7 T8 T9
T10 T11 T12 T13 T14 T15 T16 T17 T18 T19
T20 T21 T22 T23 T24