Cos Default; Trust - Dahua DH-PFS6428-24T Cli Configuration Manual

switch(config)# interface G1
switch(config-G1)# qos remask dscp
4.10.2

cos default

Command Description
cos default<0-7>
Parameter
None
Default
0
Command Mode
Interface configuration mode
Example
//This command is to modify the G1 qos trust mode to COS port.
switch(config)# interface G1
switch(config-G1)# cos default 6
4.10.3

trust

Command Description
qos trust
//This command is to set port trust packets take priority.
no qos trust
//This command is to set port trust default port priority.
Parameter
None
Default
Qos trust
Command Mode
Interface configuration mode
Example
//This command is to set port 1 trust port the default priority.
Switch(config)#interface G1
switch(config-G1)# no qos trust