Table of Contents
Advertisement
switch(config)#interface G20
switch(config-G20)cos default 6
switch(config-G20)no qos trust
b、 Set the destination address of the Ixia1-2 port to the source MAC address
of the Ixia3 port.
c、1-2 ports start sending data packets after learning MAC addresss.
（二）Test result
Conclusion:pass
Observe the source MAC address of the packets which capture in port
3 ,you can find that the received data packets from port 11.
the packets of high queue first pass
Hide quick links:
Advertisement
Table of Contents
