Show Igmp-Snooping Group; Example - Dahua DH-PFS6428-24T Cli Configuration Manual

4.6.5

show igmp-snooping group

Command Description
show igmp-snooping group
Parameter
None
Default
None
Command Mode
Privileged mode

Example

//This command is to display multicast group information:
switch# show igmp-snooping group
VID SOURCE
----------------------------------------------- -----------------------
1
1
1
4.6.6
example
Member ports requesting to join the multicast group can receive multicast
streams, but non-member ports not requesting to join the multicast group cannot
receive multicast streams.
switch# configure terminal
switch(config)# igmp snooping
switch(config)# interface G1
switch(config-G1)# igmp-snooping static-group 233.2.2.2 vlan 1
switch(config)# interface G2
switch(config-G2)# igmp-snooping static-group 233.2.2.2 vlan 1
switch(config)# interface G3
GROUP
0.0.0.0 233.45.18.88
0.0.0.0 239.255.255.250
0.0.0.0 224.0.0.252
interFACE
G4
G4 G2
G2 G4