Table of Contents
Advertisement
Disable
Command Mode
Interface configuration mode
Example
switch(config)# interface G1
switch(config-G1)# loop-protection transmit
6.8.4
show loop-protection
Command Description
show loop-protection status
show loop-protection interface [NAME]
Parameter
None
Default
None
Command Mode
privilege mode
Example
switch# show loop-protection status
6.8.5
example
Three devices form a ring network (SW2 is a switch without the
management function), and PC1 can communicate with PC2 normally.
When any of the other links except for the link in which the blocked port is
located has a fault, the loop protection function can implement fast switching.
sw1:
switch# configure terminal
switch(config)# loop-protection
switch(config)# loop-protection tx-time 600
Hide quick links:
Advertisement
Table of Contents
