Show Ip Ospf; Example - Dahua DH-PFS6428-24T Cli Configuration Manual

switch(config-vlanif2)# ip ospf authentication message-digest
switch(config-vlanif2)# ip ospf authentication-key abc
5.3.10

show ip ospf

Command Description
//This command is used to display the OSPF
show ip ospf border-routers/database/interface/neighbor/route
Parameter
border-routers
database
interface
neighbor
route
Default
None
Command Mode
Privileged mode

Example

//This command is to display the border-routers.
switch# show ip ospf border-routers
//This command is to display the database.
switch# show ip ospf database
//This command is to display OSPF interface information.
switch# show ip ospf interface vlanif1
//This command is to display the neighbor.
switch# show ip ospf neighbor
//This command is to display the OSPF route.
switch# show ip ospf route
5.3.11
example
Network diagram as shown in Figure:
Boundary router, which is used
to display the border router.
Link state database,
OSPF link state database
Display interface
information
Neighbor: view OSPF neighbor
table
Route: view OSPF route
view
OSPF