Address Mapping Between Base And Alias Devices - HPE XP7 User Manual

F9=Swap

Address mapping between base and alias devices

To avoid serious failures that can occur during data processing, complete the following:
• Define the unit address mapping for base and alias devices to the host operating system.
• Match the address mapping defined in the storage system using Remote Web Console.
The following figure shows examples of mappings between base devices and alias devices.
(A) x 00-x3F:Base
x 40-xFF:Alias
34 Address mapping between base and alias devices
F12=Cancel F22=Command -
(B) x 00-x3F:Base
x 40-x7F:Alias
x 80-xBF:Base
x C0-xFF:Alias
(C) x 00-x7F:Alias
x 80-xFF:Base
(D) x 00-x3F:Alias
x 40-x7F:Base
x 80-xBF:Alias
x C0-xFF:Base