HPE XP7 User Manual page 41

3. In the Parallel Access Volumes window (shown in the following figure), select the LDKC which
includes the CU image to be modified from the LDKC list.
4. From the CU list, select the CU image which contains the desired base volumes.
Base volumes are displayed in Base Volume List.
No volumes are displayed if the selected CU image only contains devices to which aliases cannot be
assigned, such as 3390-V type devices or any type of open system volume. In these cases, select
another CU image.
5. Select one or more base volumes in the Base Volume List.
6. Select one or more free volumes in the Free Volume List.
7. Click Add to assign the selected free volumes to the selected base volumes. The assignments appear
in the Alias Volume List shown in the following figure.
Performing Parallel Access Volumes operations 41