Defining logical control units
You can use the HCD main screen to modify and view configuration data.
Prerequisites
•
The channel paths are defined.
•
You are using z/OS or z/VM.
Procedure
1. From the ISPF/PDF primary options menu, select the HCD option.
2. On the HCD main screen, for I/O definition file, for Work I/O definition file (IODF), verify the file is
the one you want to use and then select menu item 1, Define, modify, or view configuration data.
Command ===> ________________________________________________________________
Select one of the following.
1_
0.
Edit profile options
1.
Define, modify, or view configuration data
2.
Activate or process configuration data
3.
Print or compare configuration data
4.
Create or view graphical configuration report
5.
Migrate configuration data
6.
Maintain I/O definition files
7.
Query supported hardware and installed UIMs
8.
Getting started with this dialog
9.
What's new in this release
For options 1 to 5, specify the name of the IODF to be used.
I/O definition file . . . 'SYS1.IODF00.WORK'
3. On the Define, Modify or View Configuration Data screen, select menu item 1, Operating system
configurations.
C
Select type of objects to define, modify, or view data.
S
1
20
Defining logical control units
z/OS V1.11 HCD
Define, Modify, or View Configuration Data
4_ 1. Operating system configurations
consoles
system-defined generics
EDTs
esoterics
Hardware Configuration
z/OS V1.11 HCD
+
_