HPE XP7 User Manual page 28

/ LABSYSTM
************************** Bottom of data
***************************
F1=Help
F6=Previous
F22=Command
9. On the Actions on selected operating systems screen, select menu item 1, Select (connect,
change) and then press Enter.
Select by number or action code and press Enter.
1.
2.
F1=Help
10. On the Define Device Parameters / Features screen, complete the following values, and then press
Enter on your keyboard.
• For DYNAMIC, type whether PAV is dynamic or static.
Values:
- Yes: The device supports a dynamic configuration.
- No: The device supports a static configuration.
Default: Yes
• For WLMPAV, type whether the device is supported by WLM.
Values:
- Yes: The device supports WLM.
- No: The device supports WLM.
Default: Yes
28 Defining devices
MVS OS Configuration List (EDT's)
F2=Split
F7=Backward
Actions on selected operating systems
Select (connect, change) . . . . . (s)
Disconnect from OS
F2=Split F3=Exit
Define Device Parameters / Features
F3=Exit F4=Prompt
F8=Forward F9=Swap
. . . . . . . . (n)
F9=Swap
F5=Reset
F12=Cancel
F12=Cancel -