Query Virtual Pav Command - HPE XP7 User Manual

HYPERPAVALIAS(A0C0,0)
DASD A001 ON DASD
DEVCTL HYPERPAVBASE(0)
CAUTION: The DETAILS operand is only valid for dedicated DASD and mini-disk DASD.

QUERY VIRTUAL PAV command

Use the QUERY VIRTUAL PAV command to show the status of all PAV and HPAV devices that z/VM can
access.
Run this command using the following syntax:
Query Virtual PAV {vdev | vdev1 - vdev2 | ALL}
The following figure shows a sample output of this command.
<BASE>
q v pav 1000
HYPERPAV BASE
<ALIAS>
q v pav 3000
HYPERPAV ALIAS 3000 ASSIGNED A0C0 POOL 0
A001 R/W CMA001 SUBCHANNEL = 005E
1000 ON A000 CMA000 ASSIGNED A000 POOL 0
QUERY VIRTUAL PAV command 59