Base Volume List - HPE XP7 User Manual

Item
Base Volume
List
Alias Volume
List
Free Volume
List
Add
Delete button
Apply button
Cancel button

Base Volume List

The Base Volume List displays the LDEVs that are currently defined in the selected CU image. Each of
these LDEVs can be a Parallel Access Volumes base device. When you assign and remove aliases for
base devices, you select the base devices from this list. The following table describes the items in the
Base Volume List.
Item
Base Volume
Alias Count
(Initial)
Selected
Select All
66 Base Volume List
Description
Displays the LDEVs that are currently in use in the selected CU image.
For a description of the items, see Base Volume List.
Displays the alias devices assigned to the selected base devices.
For a description of the items, see Alias Volume List.
Displays the LDEV addresses of unused volumes in the selected CU.
For a description of the items, see Free Volume List.
Assigns aliases to selected base devices. When you click Add, the selected free
LDEVs are assigned to the selected base devices. The new alias devices are
displayed in the Alias Volume List, and the LDEV addresses are no longer displayed
in the Free Volume List. To complete your request to assign the new aliases as
specified, you must click Apply.
Removes aliases assigned to a selected base device. When you click Delete, the
selected alias devices are removed from the Alias Volume List, and their LDEVs are
displayed in the Free Volume List. To complete removing the aliases as specified,
you must click Apply.
Applies the settings to the storage system.
Discards any changes and restores the initial settings.
Description
Displays the LDKC number, CU number, and LDEV number of the base volume. For
the volume used for Parallel Access Volumes, an asterisk (*) is attached next to the
LDEV number (for example, 00:00:00 *). The capacity of the volumes attached
asterisks (*) is an object for calculation of used capacity.
Displays the number of aliases currently assigned to the base volume in the disk
storage system. The number of aliases set in the base volume by the user is also
displayed in the parentheses.
Displays the number of selected base volumes and the total number of base volumes
in the selected CU image. For example, 2/73 indicates that two base volumes are
selected out of a total of 73 base volumes in the selected CU image.
Selects all volumes in the Base Volume List.