HPE XP7 User Manual page 22

• Control unit number
• Control unit type - 2107
• Switch connection information
Goto Filter
------------------------------------------------------------------------------
Command ===> _______________________________________________ Scroll ===> CSR
Select one or more control units, then press Enter.
/ CU
_ 000
_ 00A
_ 010
_ 011
_ 012
_ 013
_ 014
_ 015
_ 016
_ 017
_ 020
# 030
# 034
_ 038
_ 03E
_ 040
_ 041
_ 042
_ 043
_ 044
The Select Processor / Control Unit screen opens.
6. Select the processor complex to which the control unit attaches with slash (/) at the beginning of the
line, and then press Enter.
Command ===> _______________________________________________ Scroll ===> CSR
Select processors to change CU/processor parameters, then press Enter.
Control unit number . . : 0000
/ Proc.CSSID 1------ 2------ 3------ 4------ 5------ 6------ 7------ 8------
_ SYSTEM.0
******************************* Bottom of data ********************************
The next Select Processor / Control Unit screen opens.
22 Defining devices
Backup Query
Specify or revise the following values.
Control unit number
Control unit type
Serial number . . . . . . . __________
Description . . . . . . . . ________________________________
Connected to switches
Ports . . . . . . . . . . . __
If connected to a switch:
Define more than eight ports . . 2
Propose CHPID/link addresses and
unit addresses . . . . . . . . . 2
Select Processor / CU
---------------Channel Path ID . Link Address + ---------------
Help
Control Unit List
---#---
Add Control Unit
. . . . ____ +
. . . . . _____________
. . . __ __ __
__ __
1.
1.
Control unit type . . . : 2107
To add, use F11.
+
__ __ __ __ __
__ __ __ __ __
Yes
Yes
Row xxx of yyy More:
+
+
>