HPE XP7 User Manual page 43

If you select Actions and do not see a Mainframe Connection item listed on the drop-down menu,
the Remote Web Console secondary window function probably is not enabled.
2. Click to change to Modify mode.
3. In the Parallel Access Volumes window (shown in the following figure), select the LDKC which
includes the CU image to be modified from the LDKC list.
4. From the CU list, select the CU image which contains the aliases to be removed.
Base volumes are displayed in the Base Volume List.
No volumes are displayed if the selected CU image only contains devices to which aliases cannot be
assigned, such as 3390-V type devices or journal volumes. In these cases, select another CU image.
5. Select one or more base volumes in the Base Volume List. Press Ctrl and click to select multiple
base volumes, press Shift and click to select a series of base volumes, or click Select All to select all
base volumes in the CU image. Alias volumes for each selected base volumes appear in the Alias
Volume List as shown in the following figure.
Performing Parallel Access Volumes operations 43