Assigning Alias Volumes To Different Base Volumes - HPE XP7 User Manual

6. Select one or more alias volumes to remove in the Alias Volume List. Press Ctrl and click to select
multiple alias volumes, Press Shift and click to select a series of alias volumes, or click Select All to
select all alias volumes in the CU image.
7. Once one or more alias volumes are selected, click Delete to remove the selected alias volumes from
the selected base volumes and move these alias volumes back to the Free Volume List.
8. Click Apply to apply the changes.
More information
Parallel Access Volumes window on page 65

Assigning alias volumes to different base volumes

Alias volumes may be manually assigned to a different base volume in the same CU image using the
Parallel Access Volumes window. This only applies to static or dynamic Parallel Access Volumes.
Prerequisites
• The number of requests to the base volume to which you are moving the alias volume is less that 50
IOPS. Use the Resource Measurement Facility Report Analysis (RMF) or another available software
application to get this performance information.
CAUTION: To avoid a decline in processing performance, do not assign alias volumes to a
different base volume if more than 50 IOPS exist.
• You must have Storage Administrator (Provisioning) role to reassign aliases.
• You must enable the Remote Web Console secondary window. For more information, see the chapter
about how to use the Remote Web Console secondary window in the HPE XP7 Remote Web Console
User Guide.
44 Assigning alias volumes to different base volumes