7. Select menu item 2, Group connect, and then press Enter.
Command ===>
Select proces
Control unit
/ Proc.CSSID
/ SYSTEM.0
******************************* Bottom of data ********************************
The next Select Processor / Control Unit screen opens.
8. Enter the following information:
•
chpids that attach to the control unit
•
the logical control unit address
•
the device starting address
•
the number of devices supported
Specify or revise the following values.
Control unit number
Processor ID . . . . . : SYSTEM
Channel Subsystem ID .
Channel path IDs . . . . 2E
Link address . . . . . . ____
Unit address . . . . . . 00
Number of units
Logical address
Protocol . . . . . . . . __
I/O concurrency level
The LCU is defined.
Select Processor / CU
Actions on selected processors
Select by number or action code and press Enter.
__
1.
Select (connect, change)
2.
Group connect . . . . . . . . . . . (g)
3.
Disconnect
Select Processor / CU
Change Control Unit Definition
. : 0000
: 0
. . . . 256
. . . . 0
+ (same as CUADD)
+ (D, S or S4)
. 2
+ (1, 2 or 3)
. . . . . (s)
. . . . . . . . . . . . (n)
Type . . . . . . : 2107
2F
34
35
__
____
____
____
____
__
__
__
__
___
___
___
___
__
__
__
+
____
____
____
+
__
__
__
+
___
___
___
Defining devices
23