Rear Panel Overview - Keysight Technologies N9322C User Manual

Rear Panel Overview

SERIAL LABEL
ATTACH HERE
HIPOT LABEL
ATTACH HERE
1
LAN
2
3
1 Kensington Lock
2 USB Host connector provides a connection between the
analyzer and an PC for remote control.
3 LAN port A TCP/IP Interface used for remote operation.
4 EXT TRG IN (TTL) connector accepts an external voltage input,
the positive edge of which triggers the analyzer sweep
function. (BNC female)
5 REF IN connector accepts an external timebase with a
frequency of 10 MHz, amplitude of –5 to +10 dBm. (BNC
female)
6 REF OUT connector provides a frequency of 10 MHz, amplitude
of –10 dBm reference output. (BNC female)
7 REF OUT connector (Option PFR) is an optional connector for
precision 10 MHz reference from OCXO.
8 AC Power Receptacle accepts a three- pin line power plug.
9 Power switch
After switch on, the analyzer enters into standby mode and
the orange standby LED on the front panel lights.
10 GPIB connector (Option G01) is an optional interface. This GPIB
connector supports remote operation.
10
REF IN REF OUT
TRIG IN 10MHz 10MHz
T T L
6
5
4
lock the instrument and keep its safety.
isolates the analyzer from the AC line power.
Rear Panel Overview
OCXO
REF OUT
~100-240 V
10MHz
50/ 60 Hz
100 W MAX
PC
7
Overview
9
8
9