Spectrum Monitor - Keysight Technologies N9322C User Manual

Key Reference
MODE

Spectrum Monitor

Spectrogram
Restart Meas
Update Interval
136
Pause/
Continue
Preset
Sets the power meter softkey menu options to the preset
conditions. For example, the upper and lower limits are set
to their preset limit values.
Key access: Mode > Power Meter
Press Mode > Spectrum Monitor to access the submenu listed
as below:
Toggles the spectrogram monitoring between Run and Pause.
Run/Pause
Key access: MODE > Spectrum Monitor
Resets the spectrogram display.
Key access: MODE > Spectrum Monitor
Enables you to set the interval of time to update data to 1
or more seconds. Or, you may set it to automatically
determine the Update Interval that provides the maximum
data collection speed.
A data sample is taken every time interval for display on the
spectrogram. Increasing the update time allows data
capturing over a longer period of time in the spectrogram.
Key access: MODE > Spectrum Monitor
Next
View the next points of the chart.
Continues or pauses the current measurement.
When the measurement is in process, this softkey
is displayed as "Pause"; when the measurement is
paused, the softkey is displayed as "Continue".
Key access: Mode > Power Meter > Meas Setup