Ask/Fsk Modulation Analysis - Keysight Technologies N9322C User Manual

Key Reference
MODE

ASK/FSK Modulation Analysis

Carrier Freq
Symbol Rate
144
Use the arrow keys to highlight the mode you need and
press [ENTER] as a terminator. When this mode is selected,
the ASK/FSK modulation analysis menu will be displayed.
Sets the modulated carrier frequency.
Key access: Mode > ASK/FSK Modulation Analysis
This specifies the fundamental symbol rate of the signal to
be analyzed. The values should be positive. The non- positive
value will be converted to 1Hz. The measurement accuracy
will be impacted if this value isn't set precisely.
Key access: Mode > ASK/FSK Modulation Analysis
Filter Setup
Accesses the Filter setup submenu for further configuration.
Key access: Mode > ASK/FSK Modulation Analysis
Meas
Filter
Ref Filter Selects the Measure Filter as Root Nyquist,
Alpha/BbT Sets the root- off factor α for Root Nyquist and
Filter
Symbols
View
Accesses the submenu to select four display mode:
Symbol - displays the binary symbol in full screen/window.
Waveform - displays the signal waveform.
ASK Error - displays the ASK error.
Eye Diagram - Displays the Eye diagram.
Key access: Mode > ASK/FSK Modulation Analysis
Selects the Measure Filter as Root Nyquist,
Nyquist, and Gaussian.
Nyquist, and Gaussian.
Nyquist filter or BbT for Gaussian filter.
Sets the symbol numbers for the selected filter.
The allowed value range is from 2 to 25.