Files Operation - Keysight Technologies N9322C User Manual

Files Operation

Locating and Viewing Files in the Catalog
Task Planner
The analyzer will store and retrieve data files similar to
using a PC. The analyzer allows you to view and save files in
the internal storage of the analyzer or to a USB storage
device. This section provides information on how to locate
catalogs (file types) and to save files.
The analyzer has four types of files:
State
records the current controls and settings of the analyzer. Use
this file type for saving test parameters for future recall,
such as frequency and BW settings. (file extension: .STA).
Trace
stores trace information (file extension: .TRA).
Setup
records the system setting information, such as language,
date/time, and power saving mode. This file type is not used
for test parameter setup information. (file extension: .SET).
Screen
stores screen captures of the display (file extension: .JPG).
Limits
which stores data sets to determine whether a trace has
exceeded preset specifications (file extension: .LIM)
CSV
records the trace data and available for review on PC.
(file extension: .CSV)
contains the user- defined measurement tasks in sequence
which make the test task easier in field test.
(file extension: .TPF).
Correction
The amplitude correction file is used for trace amplitude
offset compensation. Please refer to
to edit and save the correction file on BSA PC software.
(file extension: .COR).
Standard
contains the frequency range and corresponding parameters
for a specific communication standard. It allows you to
recall those default settings for the singal searching and
testing in that range. (file extension: .STD).
Functions and Measurements

Files Operation

"Corrections" on page 104
95