Keysight Technologies N9322C User Manual page 160

Key Reference
System
152
System Info
Accesses the submenu to check the system information as
below.
Key access: System > More
Show System
options installed in your analyzer. It also displays the
instrument model number, product number, serial number,
the date of production, etc.
Installed Options
Error History
reported. The most recent error will appear at the bottom of
the list. If the same error occurs continuously, that error
message will not be added repeatedly to the list. Refer to
"Instrument Messages" on page 167
Prev Page/
Next Page
Clear Error Queue
Service
Accesses the submenu to set the service settings as below.
Key access: System > More > Service
Calibration
base of the analyzer, load default values for the alignment
system.
Time Base
by Ext
Amp
Alignment
CAL OUT
On Off
Upgrade
USB disk with the firmware upgrade package plug
connected.
Displays the number and description of the
displays the installed option list.
Accesses a list of the 100 most recent errors
Access the previous/next page of error
messages.
Clears all the errors in the errors queue.
Accesses the submenu to calibrate the time
Calibrates the time base of the analyzer
with external source.
Adjust the amplitude accuracy according
the internal cal out signal.
Turns the internal amplitude reference
signal on or off. When this signal is on, the
RF input is disabled.
Enables the firmware upgrade process once the
for details.