Rear Panel Overview - Keysight Technologies CX3300 Series User Manual

Rear Panel Overview

This section describes the rear panel of the CX3300.
Figure 2-3
1. Aux Trig In
2. Trig Out
3. 10 MHz In
Keysight CX3300 User's Guide, Edition 5
Rear Panel
1
2
3
4
5
BNC connector used to receive an external signal for the trigger source of the
CX3300. Trigger input condition can be set by using the Setting dialog box.
The input impedance is 1 M and the maximum swing is 8 V.
BNC connector used to send the TTL-level signal for the trigger source of an
external equipment.
BNC connector used to receive a reference clock for the horizontal timebase
system of the CX3300. The reference clock must meet the following
specifications.
Amplitude: 0 dBm 3 dB (typical) 16 dBm (4 Vp-p) maximum
•
10
6
Using the CX3300

Rear Panel Overview

7
9
8
45