Keysight Technologies N9322C User Manual page 124

Key Reference
Marker
116
Marker To
Accesses the following marker function menu keys:
To Center
marker frequency. In Delta mode, this softkey sets the center
frequency to the marker delta value. The function is not
available in zero span.
To Start
the frequency of the active marker. In Delta mode, this
softkey sets the start frequency to the marker delta value. To
Start is not available in zero span.
To Stop
the frequency of the active marker. In Delta mode, this
softkey sets the stop frequency to the marker delta value. To
Stop is not available in zero span.
To Reference
marker value, moving the marked point to the reference level
(top line of the graticule). In Delta mode, this softkey sets
the reference level to the amplitude difference between the
markers.
Key access: Marker
Function
Accesses the marker function softkeys listed below.
Normal
is set to default marker function.
Counter
Noise
density.
Band Power
between the reference and active markers.
Demod
Demod Setting
demodulation, FM demodulation or demodulation Off. It also
accesses the Speaker Vol, and Delay Time menu keys
described below.
Key access: Marker
Sets the center frequency of the analyzer to the
Changes the start frequency so that it is equal to
Changes the start frequency so that it is equal to
Changes the reference level to the active
Marker To
>
Activates the default readout mode. This function
Activates a frequency counter mode.
Activates a noise readout mode for evaluating power
Indicates the power over that part of the trace
Activates the demodulation mode.
Accesses the menu keys to select AM
Function
>