Table of Contents
Advertisement
Getting Started
Power Requirements
Power Requirements
AC Power Cord
14
The spectrum analyzer has an auto- ranging line voltage
input. The AC power supply must meet the following
requirements:
Voltage:
100 to 240 VAC
Frequency:
50 to 60 Hz
Power:
Maximum 100 W
The analyzer is equipped with a three- wire power cord, in
accordance with international safety standards. This cable
grounds the analyzer cabinet when connected to an
appropriate power line outlet. The cable appropriate to the
original shipping location is included with the analyzer.
Various AC power cables are available that are unique to
specific geographic areas. You can order additional AC power
cables for use in different areas. The table AC Power Cords
lists the available AC power cables, the plug configurations,
and identifies the geographic area in which each cable is
appropriate.
The detachable power cord is the product disconnecting
device. It disconnects the mains circuits from the mains
supply before other parts of the product. The front panel
switch is only a standby switch and do not disconnect
instrument from LINE power.
Hide quick links:
Advertisement
Table of Contents
