Keysight Technologies N9322C User Manual page 13

Disp - User accesses the submenu to recall the frequently
•
used user- defined state, or control what is displayed on
the analyzer, including the display line, graticule and
annotation after pressing Shift.
• Mode selects the measurement mode according to the
activated options.
• Marker accesses the marker control keys that select the
type and number of markers and turns them on and off.
Limit - Sweep accesses the softkeys that allow you to set
•
the sweep time, select the sweep mode and trigger mode,
or to set the limit functions after pressing Shift.
• Peak Search places a marker on the signal peak.
• Meas accesses the measurements mode selection submenu
in spectrum analyzer mode or the measurement submenu
in other optional modes.
7 Utility Keys
relate directly to the following utilities:
• Preset resets the analyzer to a known state
• System accesses the submenu to configure a series of
system settings, such as ports, option and languages.
Shift
• switches alternate upper blue function of the
hardkeys.
Save - File accesses the file operation submenu or activate
•
the quick- save function after pressing Shift.
8 Arrow Keys The up and down arrow keys shift the selected
item when you press [MODE] hardkey; you can also change
the mode by rotating the knob.
9 Knob The knob increases or decreases a value, a numeric
digit, or scrolls up and down to select an item in a list.
10 Data Control Keys includes the numeric keypad, ENTER key
and backspace key, change the numeric value of an active
function such as center frequency, start frequency, resolution
bandwidth, and marker position. if the analyzer is in the
remote mode, pressing ENTER key returns the analyzer to the
local mode and enables front- panel control.
Overview
Front Panel Overview
5