Keysight Technologies N9322C User Manual page 143

Resolution
1 2 3 4
Gerneral Setup
Accesses the power meter measurement setup submenu.
Key access: Mode > Power Meter
Dis Mode
Meter Chart
Chart View
Bottom
Sets the bottom value of the power meter'
display range.
Range from - 200 to (Top - 0.01) dBm.
The default value is - 70 dBm.
Accesses the associated Resolution submenu.
When the measurement suffix is W or %, this
parameter represents the number of significant
digits. When the measurement suffix is dB or dBm,
1 through 4 represents 1, 0.1, 0.01, and 0.001 dB
respectively. The default value is 3.
Key access: Mode > Power Meter
Changes the display mode between Meter and Chart.
The default mode is Meter.
Key access: Mode > Power Meter > Meas Setup
Accesses the Chart View submenu. This soft key is
disabled when the measurement is in process or if
the display mode is set to Meter.
This submenu is used to view the measurement
chart.
Key access: Mode > Power Meter > Meas Setup
Home
View the first 21 points of current
measurement chart.
End
View the last 21 points of current
measurement chart.
Prev
View the previous points of the chart.
Key Reference
MODE
135