Making A Basic Measurement; Using The Front Panel - Keysight Technologies N9322C User Manual

Functions and Measurements

Making a Basic Measurement

Making a Basic Measurement

Using the Front Panel

Numeric Keys
Unit Softkeys
30
This section provides information on basic operations. It
assumes that you are familiar with the front and top panel
buttons and keys, and display annotations of your analyzer.
If you are not, please refer to
page 4
For more details on making measurements, please refer to
"Key Reference" on page
This section provides you with the information on using the
front panel of the spectrum analyzer.
Entering Data
When setting the measurement parameters, there are several
ways to enter or modify the value of the active function:
Knob
Increments or decrements the current value.
Arrow Keys
Increments or decrements the current value by a step unit.
Enters a specific value. Then press the desired terminator
(either a unit softkey, or [Enter] hardkey).
Terminate (enter) a value with a unit softkey from the menu.
Enter Key
Terminates an entry when no unit of measure is required, or
the instrument uses the default unit.
ESC Key
To delete the current input digit prior to entering the value.
Using Softkeys
Softkeys are used to modify the analyzer function parameter
settings. Some examples of softkey types are:
Toggle
Turn on or off an instrument state.
Displays a secondary menu of softkeys, {More}.
Submenu
Choice
Selecting from a list of standard values or filenames.
Adjust
Highlights the softkey and sets the active function.
"Rear Panel Overview" on page
and
101".
"Front Panel Overview" on
9.