Displaying And Maintaining Rrpp; Rrpp Typical Configuration Examples; Configuring Single Ring Topology - H3C S3610 Series Operation Manual

Operation Manual – RRPP
H3C S3610&S5510 Series Ethernet Switches

1.7 Displaying and Maintaining RRPP

Display brief information
about RRPP configuration
Display detailed
information about RRPP
configuration
Display RRPP statistics
Clear RRPP statistics

1.8 RRPP Typical Configuration Examples

This section covers these topics:

Configuring Single Ring Topology

Configuring Intersecting Ring Topology
1.8.1 Configuring Single Ring Topology
I. Networking requirements
Device A, Device B, Device C and Device D constitute RRPP domain 1;
Specify the control VLAN of RRPP domain 1 as VLAN 4092;
Device A, Device B, Device C and Device D constitute primary ring 1;
Specify Device A as the master node of primary ring 1, Ethernet 1/0/1 as the
primary port and Ethernet 1/0/2 as the secondary port;
Specify Device B, Device C and Device D as the transit nodes of primary ring 1,
their Ethernet 1/0/1 as the primary port and Ethernet 1/0/2 as the secondary port;
The timers of the primary ring adopt the default value.
To do...
display rrpp brief
display rrpp verbose domain
domain-id [ ring ring-id ]
display rrpp statistics domain
domain-id [ ring ring-id ]
reset rrpp statistics domain
domain-id [ ring ring-id ]
Use the command...
1-18
Chapter 1 RRPP Configuration
Remarks
Available in any
view
Available in user
view