A.2
Internal Mass Storage Devices
Internal mass storage devices have SCSI configuration jumpers. Each device on the
internal and external SCSI interface must use a unique address. Subsections A.2.1
through A.2.6 show the devices and their configuration functions.
NOTICE:
A.2.1
200 MB Winchester Disk Drive
Figure A-9 shows the jumper configurations for the 200 MB Winchester Disk Drive.
Series 400 system units do not use SCSI bus terminators on
internal storage drives. No third-party internal storage de-
vices can use terminators because other storage drives may
not function properly. Refer to the third-party mass storage
device's documentation for instructions.
Figure A-9. 200 MB Winchester Disk Drive
FRU Configurations
A-9