This appendix describes how to select the Domain Compatible mode and network
priority for systems that run Domain/OS. The system EEPROM stores this informa-
tion.
B.1
Selecting Domain Compatible Mode
Perform the following procedure to configure the system to run in Domain Compatible
mode. You must perform Procedure B-1 if any of the following occur:
• You have replaced the system EEPROM with a new EEPROM that is config-
• The EEPROM mode configuration is corrupted, possibly because of electro-
•
ured in HP-UX Compatible mode or Undefined mode.
static discharge when handled without using a grounding strap.
A Domain/OS system ships from the factory with an incorrect operating mode
set.
Appendix B
Selecting the Operating Mode
and Network Priority on
Domain/OS Systems
Configuring Domain/OS Systems
B-1