System Unit, System Console, And Operating System Mismatch Situations - HP 400 Series Servicing Manual

Table C-2. System Unit, System Console, and Operating System
System RS-232
Console Mode
Monitor Local
&Kbd.
Monitor Local
&Kbd.
Monitor Remote
&Kbd.
Monitor Remote
&Kbd.
Terminal Local
Terminal Local
C-2 Configuring the EEPROM
Mismatch Situations at Power-Up
Boot Op.
Mode System
Undetermined Any
Domain HP-UX
Undetermined Any
Domain HP-UX
Undetermined Any
Domain HP-UX
Display What To Do
Shown
Config. Configure internal I/O, if needed.
menu Change Boot Mode to Op. Sys. installed.
Blank Configure internal I/O, if needed.
Screen Change Boot Mode to HP-UX.
Remote Change RS-232 to Local.
at 9 Configure internal I/O, if needed.
Change Boot Mode to Op. Sys. installed.
Blank Change RS-232 to Local.
Screen Configure internal I/O, if needed.
Change Boot Mode to HP-UX.
Select operating system, if needed.
Blank Change RS-232 to Remote.
Screen Configure internal I/O, if needed.
Change Boot Mode to Op. Sys. installed.
Blank Change RS-232 to Remote.
Screen Configure internal I/O, if needed.
Change Boot Mode to HP-UX.
Select operating system, if needed.