HP 400 Series Servicing Manual page 251

3. When the system displays
display the Configuration Control menu by typing
<c> <RETURN>
4. Select the Boot Mode Selection menu by typing the following at the prompt:
Type [key] Return ?
Go to Step 6.
5. Select the Boot Mode Selection menu by typing the following at the prompt:
Type [key] Return ?
6. Select Domain Compatible mode by typing the following at the prompt:
Type [key] Return ?
7. Permanently select Domain Compatible mode by typing the following com-
mand at the prompt:
Type T or P Return ?
If you select permanent the system retains its Domain Compatible mode con-
figuration if turned off.
8. Store the Domain Compatible mode selection in the EEPROM by typing
<e> <RETURN> <RETURN>
If in SERVICE mode, the system displays the MD header and MD prompt. If
in NORMAL mode, the system executes Self Test diagnostics and boots Do-
main/OS. Refer to the Series 400 Workstation Domain/OS Owner's Guide for
more detailed information about selecting operating modes.
mode on the bottom of the screen,
system search
<3> <RETURN>
<2> <RETURN>
<1> <RETURN>
<p> <RETURN>
Configuring Domain/OS Systems B-3