Hp-Ib Configuration; C.4.4 Hp-Ib Configuration - HP 400 Series Servicing Manual

C.4.4

HP-IB Configuration

When your display has the Configurable Interfaces menu and you enter the following
command for the HP-IB interface:
[key] < Return >
this HP-IB menu takes its place:
HP-IB
Key Feature
---------------------------
1 Sys. Controller
X to exit menu
---------------------------
Type [key] RETURN ?
The '1' key now changes definition to mean that when it is typed, you want to change
the built-in HP-IB interface's system controller function. System controller is the only
function this interface has. A "Y" in the value column means that the built-in HP-IB is
the system controller.
To change your built-in HP-IB interface's system controller function to 'no:'
1. Type the command 1 and the HP-IB menu prompt changes to:
2. Type the command N and the HP-IB menu changes to:
3. Return to the Configurable Interfaces menu by typing the command:
C-18 Configuring the EEPROM
Value
Y
1 Sys. Controller
Type Y or N RETURN ?
HP-IB
Key Feature
---------------------------
1 Sys. Controller
X to exit menu
---------------------------
Type [key] RETURN ?
X < Return >
Y
Value
N