Right Side Cover Removal And Replacement - HP 400 Series Servicing Manual

5.5.4 Right Side Cover Removal and Replacement (Model 400s)
Refer to Figure 5-24 to remove the right side cover. Follow these steps to remove the
right side cover:
1. Remove the top cover before removing the right side cover.
NOTICE:
2. Pull out on the cover's top and it snaps out of the chassis.
3. Lower the cover to disengage its lower lip from the chassis at the bottom and
5-28 FRU Removal and Replacement
Both the left and right side covers should be removed even
though only one is required for access. These covers are held
in place by the top cover. Without the top cover in place, the
side covers may easily fall off.
remove the cover.
Figure 5-24. Model 400s Right Side Cover Removal