9. When the Configuration Control menu appears and the system unit is turned on
10. If you have already selected an operating system, you should abort the menu with-
C.5
Auto System Select Mode
After configuring the system unit's Boot Mode Selection for HP-UX and I/O Con-
figuration, you should use the Auto System Select Mode to determine what operating
system is automatically booted when you turn on your workstation.
From the following Configuration Control menu
Configuration Control
Keys Mode Class
----------------------------
1 I/O Configuration
2 Auto System Selection
3 Boot Mode Selection
A Abort without changes
----------------------------
Type [key] RETURN ?
type the command
2 < Return >
causes this Auto System Select menu to appear:
Auto System Select
Keys Option
----------------------------
1 Scan for System
2 Selected System
3 Store Selected Sys. N
E Execute menu
A Abort without changes
----------------------------
Type [key] RETURN ?
for the first time, you should type the following command to enter the A uto System
Select Mode:
2 < Return >
out changing it by typing this command:
A < Return >
Status
Y
N
Configuring the EEPROM
C-25