HP 400 Series Servicing Manual page 119

Table 4-11. Boot ROM Displayed Failure Messages (Cont.)
Displayed Message
SYSTEM NOT FOUND
UNEXPECTED USE OF (address)
CONFIGURATION EEPROM Failed
EEPROM Has Bad Information
EEPROM Load Section Missing
EEPROM Defaults Section Missing
Too much data to save
Meaning and What To Do
Selected operating system not found on
mass storage devices. Verify operating
system is available on a mass storage de-
vice, then try again. If error repeats,
troubleshoot processor, interface, and
mass storage.
Possible CPU related error. Refer to
Table 4-6.
Configuration EEPROM or associated
circuits may not work correctly. One of
these situations may exist:
- Some default and some new configura-
tion values are set.
- Some error occurred that should not
affect operation. Try again. If error
repeats, replace CPU board.
Configuration Mode started; (main menu
may appear), but something failed. Try
again. If problem continues, replace CPU
board.
If Configuration Mode does not start and
no error message appears, a hardware
failure probably occurred. Replace the
CPU board.
Could not load new configuration data.
Hardware failure. Replace CPU board.
Default configurations could not be
found. Hardware failure. Replace CPU
board.
Too many interfaces for EEPROM to
manage. Reconfigure system unit with
fewer interfaces.
Fault Isolation 4-49