C.5.1 Scan For System - HP 400 Series Servicing Manual

The status column has letters indicating yes (Y) or no (N). When you type a number
key command, you change the status for that option.
Each option is explained in the next three subsections.
C.5.1 Scan for System
Mass storage devices are searched for operating systems determined by the priority
shown below:
1. SCSI interface, select codes 0-31, bus address 7-5, unit 0.
2. HP-IB interface, select codes 0-31, bus address 0, unit 0.
3. SRM interface at select code 21.
4. LAN at select code 21.
5. SCSI interface, select codes 0-31, bus address 4-0, all units.
6. HP-IB interface, select code 0 - 31, bus address 1-7, all units.
7. SRM interface at select code other than 21.
8. LAN at select code other than 21.
The boot priority list is designed to make it easy to change and control which operating
system is booted in the 'Search for System' mode. The guidelines used to establish the
boot list are
•
•
C-26 Configuring the EEPROM
High priority addresses before low priority addresses.
Local systems before remote systems (Local refers to dedicated devices and
remote refers to shared devices, i.e. a server).