Store Selected System - HP 400 Series Servicing Manual

C.5.3

Store Selected System

To set the
3 < Return >
The following Auto System Select menu appears:
Auto System Select
Keys Option
----------------------------
1 Scan for System
2 Selected System
3 Store Selected Sys. Y
E Execute menu
A Abort without changes
----------------------------
Type [key] RETURN ?
You may store either a selected operating system, or the operating system found when
the Boot ROM searches for an operating system.
When you execute this menu, the system unit resets and the following power-up dis-
play appears:
Copyright 1990,
Hewlett-Packard Company,
All Rights Reserved.
Series 400, Rev. 1, 5 Jun 90
md 12 rev 0.20, 1990/03/12.16:31:17
Bit-Mapped Video
MC68030 Processor
MC68882 Coprocessor
Configuration EEPROM
HP-HIL.Keyboard
HP-IB
DMA-C0
RAM 4194080 Bytes
HP98644 (RS-232) at 9
HP98265 (SCSI S 32) at 14
HP98643 (LAN) at 21 080009AAAAAA (T)
HP PARALLEL at 12
System Search Mode, will store selection
RESET to Power-up SPACE clears input Select System Type RETURN ?
Store Selected Sys.
Status
N
Y
option to Y, type the command
Configuring the EEPROM
:HP7958, 123, 4
1H SYSTEM_HPUX
:HP7959, 567, 8
2H SYSTEM_HPUX
C-27