I/O Configuration Mode; Entering I/O Configuration Mode; C.4 I/O Configuration Mode - HP 400 Series Servicing Manual

select either the I/O Configuration or Auto System Select Mode. These modes are ex-
plained in the following sections.
C.4

I/O Configuration Mode

These procedures are used for interfaces that are configured under Boot ROM control
using keyboard inputs. If your system unit has interfaces with switches or jumpers to
configure it, refer to their documentation for instructions.
C.4.1

Entering I/O Configuration Mode

The following menu appears when you first enter the Configuration Mode:
Configuration Control
Keys Control Class
----------------------------
1 I/O Configuration
2 Auto System Selection
3 Boot Mode Selection
A Abort without changes
----------------------------
Type [key] RETURN ?
Type the following command:
1 < Return >
and a menu similar to the following appears:
Configurable Interfaces
Keys Interface Select Code
---------------------------
1 LAN
2 SCSI
3 HP Parallel
4 RS-232
5 HP-IB
N store New values
D store Default values
A Abort without changes
----------------------------
Type [key] RETURN ?
C-12 Configuring the EEPROM
(then cycle SPU power)
21
14
12
9