Isa Accessory Boards Removal And Replacement - HP 400 Series Servicing Manual

5.5.14 ISA Accessory Boards Removal and Replacement (Model 400s)
Refer to Figure 5-33 and follow these steps to remove an ISA board. Reverse these
steps to replace an ISA board.
1. Remove the cables connected to the ISA board, the top and right side covers,
2. Remove the ISA board clamp.
3. Remove the screw holding the ISA board plate to the card cage.
4. Lift the ISA board up and out of its backplane connector.
5. Remove the ISA board from the card cage.
and the RFI cover.
Figure 5-33. Model 400s ISA Board Removal
FRU Removal and Replacement 5-43