Functional Checkout - GE MAC 2000 Service Manual

Functional Checkout

This section lists the visual inspections and functional checkout procedures that must
be performed whenever a FRU is replaced. All inspection and checkout procedures
identified for a FRU also apply to the FRU's internal PCBs and components.
To use this section, do the following:
1. Locate the appropriate FRU or non-FRU repair in one of the following tables:
• Basic System FRU Repairs
• Optional System FRU Repairs
• Non-FRU Repairs
2. To perform the visual inspections required for the repair, do the following:
a.
b.
c.
3. To perform the functional checkouts required for the repair, do the following:
a.
b.
c.
Basic System FRU Repairs
FRU Description
Bottom Cover
Printer
Printer Motor and Gears
Printer Door
Top Cover, Color Chassis, Hardware
Main PWA
Display Plastic Parts 1
Keypad
Hardware 1
Harness/Cables
Hardware 3 and Power-In Module
Power Supply
Battery
Display and O-Rings
Display Overlay and O-Rings
2053535-003C
Note the numbers in the repair's corresponding Visual Inspections column.
Go to "Visual Inspections" on page
Locate and perform the inspections associated with the numbers in the
repair's corresponding Visual Inspections column.
Note the numbers in the repair's corresponding Functional Checkouts
column.
Go to "Functional Checkout Procedures" on page
Locate and perform the procedures associated with the numbers in the
repair's corresponding Functional Checkouts column.
MAC™ 2000 ECG Analysis System
131.
131.
Visual Inspections
7, 8
7, 8
7, 8
7, 8
7, 8
7, 8
3, 7, 8
3, 7, 8
7, 8
7, 8
7, 8
7, 8
5
3, 7, 8
3, 7, 8
Maintenance
Functional Checkouts
1, 2, 3, 15
1, 2, 3, 9, 15
1, 2, 3, 9, 15
1, 2, 3, 9
1, 2, 3, 15
1, 2, 3, 4, 5, 6, 13
1, 2, 3, 7
1, 2, 3, 8
1, 2, 3, 7
1, 2, 3, 7, 8, 9, 10
1, 2, 3, 15
1, 2, 3, 15
1, 2, 3, 12
1, 2, 3, 7
1, 2, 3, 7
129