GE MAC 2000 Service Manual page 85

Attaching the Chassis
Use the following procedure to attach the chassis and PWA to the bottom cover.
1. Lower the chassis onto the bottom cover, carefully threading the cables through
the slots in the chassis.
2. Connect the cables and harnesses, identified in the following photograph,
to the PWA.
3. Position the power supply/KISS pump base on the chassis.
4. Secure the power supply/KISS pump base to the chassis using its fasteners, as
identified in the following photograph.
2053535-003C
MAC™ 2000 ECG Analysis System
Maintenance
85