Introduction
Responsibility of the Manufacturer
GE Healthcare is responsible for the safety, reliability, and performance of hardware
supplied by GE Healthcare only if the following conditions are met:
• Assembly operations, extensions, readjustments, modifications, or repairs are
performed by persons authorized by GE Healthcare.
• The electrical installation of the room where the device is used complies with the
requirements of the appropriate local, state, and other government regulations.
• The equipment is used in accordance with the instructions for use.
Responsibility of the Purchaser/Customer
The customer is responsible for providing appropriate desks, chairs, electrical wall
outlets, network connections, and analog phone lines, and for locating any of the
system components described in this manual in compliance with all local, state, and
national codes.
Product and Packaging Information
This section identifies the following:
• Hardware labels and their locations on
• Symbol Descriptions on
Hardware Label Locations
20
page 20
page 21
MAC™ 2000 ECG Analysis System
2053535-003C