Maintenance
4.
Turn over the top cover and insert the O-ring into the groove on the top cover, as
shown in the following photograph.
5.
Align the tabs on the display bottom cover with the slots on the device top cover,
as indicated in the following photograph.
6.
Lower the display bottom cover toward the device top cover and carefully
thread the display cable and keypad ribbon through the slots on the top cover.
7.
Lower the display assembly onto the top cover and gently slide the display
assembly toward the back of the top cover assembly, as shown in the following
photograph.
80
MAC™ 2000 ECG Analysis System
2053535-003C