3.
Holding the printer module assembly vertically, remove the fastener securing
the printer motor cover to the printer module assembly, as shown in the
following photograph, and lift off the printer motor cover.
4.
Locate the printer door sensor, as identified in the following photograph.
5.
With a pair of needle nose pliers, gently remove the snap-fitted cover securing
the printer door sensor to the printer module assembly, as shown in the
following photograph.
6.
Remove the printer door sensor from the snap-fitted cover, as shown in the
following photograph.
2053535-003C
MAC™ 2000 ECG Analysis System
Maintenance
107